Showing posts with label principles. Show all posts
Showing posts with label principles. Show all posts

Sunday, November 12, 2023

Nelson Mandela on the Palestine/israel issue



 https://www.facebook.com/reel/1554176501987563?fs=e&s=TIeQ9V

We fully endorse late President Nelson Mandela’s views expressed in this link. 

If one changes-principles at will, such people have no right to lead ANYTHING!

The hypocrisy, lack of spine, of those leaders and people standing behind ANYONE in this conflict ONLY shows their own personal agenda. 

No one has said THIS more clearly than Nelson Mandela!

We request you to read this blog entry of ours

  “Through the eyes of an Arab Israeli..” 

which was posted on 3rd October 2007!

(Meeting with Israeli Palestinian Human Right Activist Najib Abu Rokaya)

Friday, September 29, 2023

10 Guiding Principles



K. C. Mammen Mappillai

Doyen of Kerala


We set up the 10 Guiding Principles to see us through life.

The 1st principle is to always be truthful. (A few ”white lies” were to be permitted! :-) )

Principle 2 is to *Stay where your presence is appreciated*.

Principle 3 is to never claim credit for something that does not belong to you.

Principle 4 is do not violate the laws of the country you live in.

Principle 5 is to  lend a helping hand to anyone who reaches out to you.

Principle 6 is to genuinely pray for anyone facing a difficult situation.

Principle 7 is do not be cowed down by aggressors, however powerful they seem to be!”

Principle 8 is do not run to find the pot of gold at the end of a rainbow.

Principle 9 is to give respect to those who deserve it.

And finally, Principle 10 is never to violate the “Sacred Trust”, set out for the Malayala Manorama newspaper and all those encompassed in its family. It  was set down pre-1953 by Jacob’s grandfather, the late K. C. Mammen Mappillai.

"By God's grace, Manorama is in a position to create and garner a forceful public opinion. This may be used for the good or the bad. But, we should consider it as a public trust bestowed upon us for the selfless service of humanity. 

 "You will have no qualms to use Manorama as a sacred public trust or an institution God has trustingly bestowed upon us to be used without fear or favour from anyone. You should always work with this in mind. God has placed in our hands a mighty weapon. To use it for our personal, vindictive and vitriolic ends will be an unpardonable and immoral act injurious to the faith bestowed on us by a large number of people. God does not want that. Hence, our eternal vow should be to tirelessly work for the success of fairness, justice and morality. '

It remains a sacred, inviolable dictum for Malayala Manorama.

[The K. C. Mammen Mappillai family today has amongst its ranks, 2 Padma Bhushans (K. M. Cherian and K. M. Mathew) and 3 Padma Shris (K. M. Philip, K. M. Mammen Mappillai and Mammen Mathew).]

It is also the primary Guiding Principle of Annikki and Jacob.




Sunday, September 03, 2023

Most exciting technology interest

Over the years I have been involved with dozens of projects on plastics, rubber, fibres, adhesives, microelectronics.

Someone recently asked me which particular technology I found most exciting.

Undoubtedly it was the subject of extrusion coating.




In extrusuon coating one material in the form of a hot film extruded from a flat long orifice is laid on a moving substrate. The substrate can move at extremely high speeds. Several metres per second.

All the action happens in a fraction of a second.

Using this technique many thousands of products can be prepared, some very simple to highly complex composites.

I first got interested in extrusion coating when I visited the factory of company called Telecon Plastics situated south of London in 1968. 

I read tonnes of articles on the subject and discussed it with many experts. The most interesting discussions with persons who operated these machines. 

When I returned to India in 1969, I found that one of our family concerns, Devon Plastics, had a rather unique machine which was an extrusion coater. It could be used to produce simple plastic film and complex coated products.

With this.machine the face of India was changed in several areas as I teamed up with a brilliant Management Expert, the late Prem Sadanand. 

Based on my practical experience on that machine, I got several consultancy appointments in Vishakapatnam, Hyderabad, Baroda, and other locations around India. 

I worked on several differnet types of machines, and was able to get to know the process, hands on, very intimately. 

Cheap packaging products to complex laminates used by defence and pharmaceuticals were developed.

I was asked to write a “Handbook of Extrusion Coating” by the Rubber and Plastics Research Association of Great  Britain (RAPRA). 

They had been my first employer between 1966 and 1969. 

During my time with them I had over a dozen major publications written and published in the UK. 

I agreed to write the handbook but it was at the time of the Iraq invasion by the US and UK.

I realised that if I wrote that book for the UK Association, I would be colluding with a power which was lying to the world.

I asked to be released from that contract as our principles did not permit me to work with those who told blatant lies, such as the non-existent weapons of mass destruction that Tony Blair said existed in Iraq.

I am glad that I followed our Guiding Principles of never working with liars.


Friday, February 10, 2012

U Decide : Does This Guy Even Know His Subject?




There are times when you receive a forward from a friend and you laugh of guts out. I laughed at each line while I read through this.

In the evening, I read it to our grandson, Samuel, in Newcastle, with Annikki listening, and had them both in splits of laughter.

Being largely involved with Phyics in my later stage of my career, mainly Solid State Physics, the punch line hit me right between the eyes!

Enjoy!

"This was a question in a physics degree exam at the University of Copenhagen:

"Describe how to determine the height of a skyscraper with a barometer."

One student replied: "You tie a long piece of string to the neck of the barometer, then lower the barometer from the roof of the skyscraper to the ground. The length of the string plus the length of the barometer will equal the height of the building."

This highly original answer so incensed the examiner that the student was failed immediately.

The student appealed on the grounds that his answer was indisputably  correct, and the university appointed an independent arbiter to decide the case.

The arbiter judged that the answer was indeed correct, but did not display any noticeable knowledge of physics.

To resolve the problem it was decided to call the student in and allow him six minutes in which to provide a verbal answer that showed at least a minimal familiarity with the basic principles of physics.

For five minutes the student sat in silence, forehead creased in thought.

The arbiter reminded him that time was running out, to which the student replied that he had several extremely relevant answers, but couldn't make up his mind which to use.

On being advised to hurry up the student replied as follows:

"Firstly, you could take the barometer up to the roof of the skyscraper,drop it over the edge, and measure the time it takes to reach the ground.

The height of the building can then be worked out from the formula H = 0.5g x t squared. But bad luck on the barometer."

"Or if the sun is shining you could measure the height of the barometer, then set it on end and measure the length of its shadow. Then you measure the length of the skyscraper's shadow, and thereafter it is a simple matter of proportional arithmetic to work out the height of the skyscraper."

"But if you wanted to be highly scientific about it, you could tie a short piece of string to the barometer and swing it like a pendulum, first at ground level and then on the roof of the skyscraper. The height is worked out by the difference in the gravitational restoring force T = 2 pi sqroot (l/g)."

"Or if the skyscraper has an outside emergency staircase, it would be easier to walk up it and mark off the height of the skyscraper in barometer lengths, then add them up."

"If you merely wanted to be boring and orthodox about it, of course, you could use the barometer to measure the air pressure on the roof of the skyscraper and on the ground, and convert the difference in millibars into feet to give the height of the building."

"But since we are constantly being exhorted to exercise independence of mind and apply scientific methods, undoubtedly the best way would be to knock on the janitor's door and say to him, 'If you would like a nice new barometer, I will give you this one if you tell me the height of this skyscraper'."

(The student was Niels Bohr, the only Dane to win the Nobel prize for Physics)"